Đăng nhập | Đăng ký

Thiết kế bộ điều khiển trượt bằng thuyết ổn định Lyapunov để điều khiển giàn cần trục kiểu con lắc đôi
Design of sliding controller using Lyapunov stability theory for control of double pendulum gantry crane

Bùi Thị Thêm, Nguyễn Văn Trung, Phí Thị Thanh Huyền
Tóm tắt
The difficulty in controlling the operation of the gantry crane (GC) is to face the complex phenomenon of the double pendulum. The oscillation of the hook (H) and the load (L) has reduced the working efficiency, reduced the ability to accurately position the trolley (T) and even caused mechanical damage and unsafe accidents. Therefore, the paper presents a solution to design a sliding mode controller (SMC) to control the gantry crane to reduce the oscillation of the hook and the load, and at the same time increase the ability to position the forklift. The coefficient k_s is optimized according to the fuzzy controller (FC). The stability of the system is proven by the Lyapunov stability theory, which has achieved the accuracy and durability of the entire control system. The sliding mode controller has been tested through MATLAB/Simulink simulation. The simulation results show that when using the sliding mode controller, the system has good control quality.
Tệp toàn văn
Tải file : 5.pdf

Tài liệu tham khảo:
1.Van Trung Nguyen; Chunhua Yang, Ph.D; Chenglong Du; Liqing Liao, Ph.D(2019). Design and Implement of Finite-Time Sliding Mode Controller for Fuzzy Overhead Crane System. ISATRANS-D-19-00899.
2.Menghua Zhang, Xin Ma, Xuewen Rong, Xincheng Tian, Yibin Li (2016), Adaptive tracking control for double-pendulum overheadcranes subject to tracking error limitation, parametricuncertainties and external disturbances, Mechanical Systems and Signal Processing 76-77, 15–32.
3.Dianwei Qian, Shiwen Tong, SukGyu Lee (2016), Fuzzy-Logic-based control of payloads subjected to double-pendulummotion in overhead cranes, Automation in Construction 65, 133–143.
4.Van Trung Nguyen, Thi Phuong Oanh Nguyen, Chenglong Du (2018). Design fuzzy controller combined with two PID controllers to control the double-pendulum-type gantry crane. Scientific journal Sao Do University, ISSN 1859-4190. No 3(62).
5.Khalid L. Sorensen, William Singhose, Stephen Dickerson (2007). A controller enabling precise positioning and sway reduction in bridge and gantry cranes. Control Engineering Practice 15, 825–837.
6.Y.C. Fang, B.J. Ma, P.C. Wang, and X.B. Zhang (2012), A motion planning-based adaptive control method for an underactuatedcrane system, IEEE Transactions on Control Systems Technology 20 (1), 241–248.
7.Mahmud Iwan Solihin and Wahyudi(2007), Fuzzy-tuned PID Control Design forAutomatic Gantry Crane,P.O. Box 10. 50728.Kuala Lumpur, Malaysia, 1-4244-1355-9/07/$25.00, IEEE.
8.Mohammad Javad Maghsoudi, Z. Mohamed, A.R. Husain, M.O. Tokhi(2016), An optimal performance control scheme for a 3D crane, Mechanical Systems and Signal Processing 66-67, 756–768.
9.Zhe Sun, Ning Wang, Yunrui Bi, Jinhui Zhao (2015),A DE based PID controller for two dimensional overhead crane, Proceedings of the 34th Chinese Control ConferenceJuly 28-30, Hangzhou, China, 2546-2550.
10.Mahmud Iwan Solihin, Wahyudi, Ari Legowo and Rini Akmeliawati (2009),Robust PID Anti-swing Control of Automatic GantryCrane based on Kharitonov’s Stability, P.O.Box 10, 50728. Kuala Lumpur, Malaysia, 978-1-4244-2800-7/09/$25.00, IEEE.
11.Nguyen Van Trung, Pham Duc Khan, Pham Thi Thao, Luong Thi Thanh Xuan (2017), Application of genetic algorithms to design two PID controllers for crane system control in copper electrolysis. Journal of Scientific Research – Sao Do University, ISSN 1859-4190, No. 3(58).
12.D. Qian, S. Tong, B. Yang, and S. Lee (2015). Design of simultaneous input-shaping-based SIRMs fuzzy controlfor double-pendulum-type overhead cranes. BULLETIN OF THE POLISH ACADEMY OF SCIENCESTECHNICAL SCIENCES, Vol. 63, No. 4. DOI: 10.1515/bpasts,887-896.
13.Lifu Wang, Hongbo Zhang, Zhi Kong (2015).Anti-swing Control of Overhead Crane Based on Double Fuzzy Controllers.Chinese Control and Decision Conference (CCDC),978-1-4799-7016-2/15/$31.00, IEEE.
14.Xiao-jing Wang, Zhi-mei Chen (2016), Two-degree-of-freedom Sliding Mode Anti-swing and Positioning Controller forOverhead Cranes,28th Chinese Control and Decision Conference (CCDC),978-1-4673-9714-8/16/$31.00, IEEE.
15.Diantong Liu, Jianqiang Yi, Dongbin Zhao, Wei Wang(2005). Adaptive sliding mode fuzzy control for atwo-dimensional overhead crane. Mechatronics 15, 505–522.

  Ý kiến bạn đọc

Tin mới nhất

Tin xem nhiều

Liên kết

thuvien.qui.edu.vn
 
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây